Article
John P. Lapotaire, CIEC
DESCRIPTION: The purpose is to provide standardized procedures to be used for the investigation of educational structures for readily observable mold or conditions associated with mold amplification. The initial investigative process includes, but is not limited to, initial information gathering, documentation of relevant historical events and observations from an on-site walk-through. There are four potential outcomes: Neither mold nor associated conditions were readily observable. Mold was not readily observable but associated conditions were. Mold was readily observed but no associated conditions were. Readily observed mold and conditions. Outcomes 2, 3 or 4 may warrant additional investigation by a qualified professional.
•John P. Lapotaire, CIEC•Certified Indoor Environmental Consultant•Microshield Environmental Services, LLC• www.Microshield-ES.com
Related articles
- Article
IESO Working on a Standard Guide for the Inspection of an Educational Facility for Moisture Intrusio
ANSI/Pin Date: October 29, 2007 Estimated Completion Date: Fall 2010 STATUS: In Development DESCRIPTION: The purpose is to provide standardized procedures to be used for the investigation of educational structures for readily observable mold or conditions associated with mold amplification. The initial investigative process includes, but is not limited to, initial information gathering, documentation of relevant historical events and observations from an on-site walk-through. There ar
- Article
HVAC EVALUATION STANDARD FROM IESO/RIA APPROVED BY ANSI
On February 15, 2012, the American National Standards Institute (ANSI) notified the Indoor Environmental Standards Organization (IESO) of the approval of the IESO/RIA 6001-2011 Evaluation of Heating, Ventilation and Air Conditioning (HVAC) Interior Surfaces to Determine the Presence of Fire-Related Particulate as a Result of a Fire in a Structure. This is the first ANSI-approved standard for IESO. It was produced in close cooperation with a committee convened by the Restoration Industry Associa
- Article
IESO Rescinds Section of Standard
IAQA E-NewsThe Board of Directors of the Indoor Environmental Standards Organization (IESO) voted to rescind Section 2 of IESO’s Standard of Practice for the Assessment of Indoor Environment Quality, 2nd Edition, 2003. Acting within its proper authority, the IESO rescinded Sections 2210 and 2110 since they were not originally developed following ANSI Essential Requirements.•John P. Lapotaire, CIEC •Certified Indoor Environmental Consultant •Microshield Environmental Services, LLC •www.Microsh
- Article
IESO Writing the Standard on Initial Residential Mold Assessment
IESO 2210/Initial Residential Mold Assessment StandardANSI/Pin Date: October 29, 2007Estimated Completion Date: Fall 2009 STATUS: In DevelopmentDESCRIPTION:This published standard is to provide residential structure investigation procedures to identify observable mold and conditions associated with potential mold amplification including moisture intrusion. The initial investigative process includes, but is not limited to, information gathering, collection of relevant historical events and walk
- Article
ASHRAE 62.1-2010 Ventilation Standard Explained
ASHRAE Standard 62.1-2010 sets minimum ventilation rates for commercial buildings. Learn the key changes to natural ventilation, exhaust, and IAQ rules.
- Article
Home Mold Inspection in Florida: Why It Matters
Wondering if you need a home mold inspection? A Florida CIEC explains common mold causes, warning signs, and what a proper inspection should include.
